DecoMoldings

inspiration · Board and Batten

Craftsman Dining Room Wall Molding

Craftsman Dining Room Wall Molding: wall elevation, dining room layout for 10, 12, 14 ft walls, cut list, calculator and pre-cut kits.

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity9 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

Vertical battens spaced 16 in apart under a horizontal top rail, built from flat MDF boards. Craftsman rooms (craftsman) typically use board and batten, picture frame layouts: Flat, sturdy battens with a wide top rail, often in deep greens and browns.

Board and Batten layout on a 12 ft dining room wall

With battens every 16 in, a 12 ft wall takes 10 battens of 88 in plus a top rail: about 32.63 m of board including 10% waste. Check that the chair rail clears chair backs, usually 32 to 36 in.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Craftsman look

Flat, sturdy battens with a wide top rail, often in deep greens and browns. Recommended layouts: board and batten, picture frame.

Wall elevation

White wall, tone-on-tone trim, board and batten layout on a 12 ft wall. Colors are screen approximations.

Dining Room wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
10 ft988 in28.83 m16 in
12 ft1088 in32.63 m16 in
14 ft1288 in38.89 m16 in

Cut list for a 12 ft wall

Planning cut list
PieceQuantityLength
Vertical batten1088 in
Top rail112 ft run
Mid rail112 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Nested Frame Pre-Cut Wall Molding Kit for Dining Room, 3 Upper & 3 Bottom Nested Frames | Easy Installation01 / KIT

Nested Frame Pre-Cut Wall Molding Kit for Dining Room, 3 Upper & 3 Bottom Nested Frames | Easy Installation

From $295.00

View kit

Questions

How many battens for a 12 ft wall?

10 battens at 16 in spacing, plus a top rail across the 12 ft run.

How high should the chair rail be in a dining room?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Check that the chair rail clears chair backs, usually 32 to 36 in.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026