DecoMoldings

inspiration · Board and Batten

Craftsman Hallway Wall Molding

Craftsman Hallway Wall Molding: wall elevation, hallway layout for 6, 10, 14 ft walls, cut list, calculator and pre-cut kits.

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity8 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

Vertical battens spaced 16 in apart under a horizontal top rail, built from flat MDF boards. Craftsman rooms (craftsman) typically use board and batten, picture frame layouts: Flat, sturdy battens with a wide top rail, often in deep greens and browns.

Board and Batten layout on a 10 ft hallway wall

With battens every 16 in, a 10 ft wall takes 9 battens of 88 in plus a top rail: about 28.83 m of board including 10% waste. Long, narrow walls suit a repeating rhythm of equal frames.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Craftsman look

Flat, sturdy battens with a wide top rail, often in deep greens and browns. Recommended layouts: board and batten, picture frame.

Wall elevation

White wall, tone-on-tone trim, board and batten layout on a 10 ft wall. Colors are screen approximations.

Hallway wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
6 ft688 in18.78 m16 in
10 ft988 in28.83 m16 in
14 ft1288 in38.89 m16 in

Cut list for a 10 ft wall

Planning cut list
PieceQuantityLength
Vertical batten988 in
Top rail110 ft run
Mid rail110 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Accent Board and Batten Design Wall Covering Kit, Factory Primed | Pre-Cut & Ready to Assemble01 / KIT

Accent Board and Batten Design Wall Covering Kit, Factory Primed | Pre-Cut & Ready to Assemble

From $607.00

View kit
Quick Easy to Apply Peel and Stick Wall Molding, 3 Upper & 3 Bottom Frames | No Tools Required02 / KIT

Quick Easy to Apply Peel and Stick Wall Molding, 3 Upper & 3 Bottom Frames | No Tools Required

From $172.00

View kit
French Peel and Stick Wall Molding Kit, 4 Upper, 4 Middle, and 4 Bottom Frames | Easy Installation03 / KIT

French Peel and Stick Wall Molding Kit, 4 Upper, 4 Middle, and 4 Bottom Frames | Easy Installation

From $75.00

View kit
Bespoke Ready to Assemble Wall Paneling Package, Factory Primed Half of Wall | Easy Installation04 / KIT

Bespoke Ready to Assemble Wall Paneling Package, Factory Primed Half of Wall | Easy Installation

From $445.00

View kit
Shaker Square Grid Wall Paneling Kit | Pre-Cut MDF Decorative Wall Panels05 / KIT

Shaker Square Grid Wall Paneling Kit | Pre-Cut MDF Decorative Wall Panels

From $270.00

View kit
Geometric Chevron Accent Wall Molding Kit, Pre-Cut | Easy Installation06 / KIT

Geometric Chevron Accent Wall Molding Kit, Pre-Cut | Easy Installation

From $232.74

View kit

Questions

How many battens for a 10 ft wall?

9 battens at 16 in spacing, plus a top rail across the 10 ft run.

How high should the chair rail be in a hallway?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Long, narrow walls suit a repeating rhythm of equal frames.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026