DecoMoldings

inspiration · Board and Batten

Craftsman Kitchen Wall Molding

Craftsman Kitchen Wall Molding: wall elevation, kitchen layout for 6, 8, 10 ft walls, cut list, calculator and pre-cut kits.

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity6 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

Vertical battens spaced 16 in apart under a horizontal top rail, built from flat MDF boards. Craftsman rooms (craftsman) typically use board and batten, picture frame layouts: Flat, sturdy battens with a wide top rail, often in deep greens and browns.

Board and Batten layout on a 8 ft kitchen wall

With battens every 16 in, a 8 ft wall takes 7 battens of 88 in plus a top rail: about 22.58 m of board including 10% waste. Keep molding off the backsplash area and use a scrubbable paint finish.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Craftsman look

Flat, sturdy battens with a wide top rail, often in deep greens and browns. Recommended layouts: board and batten, picture frame.

Wall elevation

White wall, tone-on-tone trim, board and batten layout on a 8 ft wall. Colors are screen approximations.

Kitchen wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
6 ft688 in18.78 m16 in
8 ft788 in22.58 m16 in
10 ft988 in28.83 m16 in

Cut list for a 8 ft wall

Planning cut list
PieceQuantityLength
Vertical batten788 in
Top rail18 ft run
Mid rail18 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Shaker MDF Paneling, Long-Lasting Pre-Cut for Easy Installation | Unprimed Wall Molding W:75mm x T:8mm01 / KIT

Shaker MDF Paneling, Long-Lasting Pre-Cut for Easy Installation | Unprimed Wall Molding W:75mm x T:8mm

From $307.00

View kit
Modern Wall Trim Kit for Bedroom & Headboard Design, 3 Frames | Factory Primed for Easy Installation02 / KIT

Modern Wall Trim Kit for Bedroom & Headboard Design, 3 Frames | Factory Primed for Easy Installation

From $182.00

View kit
Half Wall Shadow Box Ready to Assemble Wall Paneling Package, Factory Primed Half of Wall03 / KIT

Half Wall Shadow Box Ready to Assemble Wall Paneling Package, Factory Primed Half of Wall

From $235.00

View kit
Self-Adhesive Trim Wall Moulding 3 Upper, 3 Bottom Picture Frames, Quick Easy Installation04 / KIT

Self-Adhesive Trim Wall Moulding 3 Upper, 3 Bottom Picture Frames, Quick Easy Installation

From $75.00

View kit
Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation05 / KIT

Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation

From $69.80

View kit
Nested Frame Nursery Wall Molding Kit, Ready to Assemble | 3 Upper & 3 Bottom Nested Frames06 / KIT

Nested Frame Nursery Wall Molding Kit, Ready to Assemble | 3 Upper & 3 Bottom Nested Frames

From $250.00

View kit

Questions

How many battens for a 8 ft wall?

7 battens at 16 in spacing, plus a top rail across the 8 ft run.

How high should the chair rail be in a kitchen?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Keep molding off the backsplash area and use a scrubbable paint finish.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026