inspiration · Board and Batten
Emerald Green Office Board and Batten Wall Molding
Emerald Green Office Board and Batten Wall Molding: wall elevation, color data (LRV 12.6), office layout for 9, 10, 12 ft walls, cut list, calculator and pre-
Project calculator
Overview
Emerald Green is a dark blue with a blue (cool) undertone and a calculated LRV of 12.6. Against white trim the contrast ratio is 5.36:1, which gives clear contrast; painted tone-on-tone, the board and batten pattern shows only through its shadow lines.
Board and Batten layout on a 10 ft office wall
With battens every 16 in, a 10 ft wall takes 9 battens of 88 in plus a top rail: about 28.83 m of board including 10% waste. A molding wall behind the desk doubles as a video-call backdrop.
Building the board and batten pattern
Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.
Painting molding in Emerald Green
Blues work best fully drenched: wall, molding and chair rail in one color, with a slightly higher sheen on the trim.
Wall elevation
Color data
| Color | Brand | Code | Hex | Calculated LRV | Undertone | Depth | Contrast vs white trim | Contrast vs black trim |
|---|---|---|---|---|---|---|---|---|
| Emerald Green | Generic | #2E6F57 | 12.6 | blue (cool) | dark | 5.36:1 | 2.77:1 |
Trim color pairings
| Pairing | Trim color | Hex | Contrast | Effect |
|---|---|---|---|---|
| tone-on-tone | Emerald Green | #2E6F57 | 1:1 | Trim painted the same color as the wall |
| matching white | BM Simply White | #F7F7EE | 5.53:1 | White with the closest undertone |
| contrast | White | #F4F3EE | 5.36:1 | Light trim for crisp contrast |
Office wall sizes: board and batten accent wall layout
| Wall width | Battens | Batten height | Board incl. waste | Spacing |
|---|---|---|---|---|
| 9 ft | 8 | 88 in | 25.7 m | 16 in |
| 10 ft | 9 | 88 in | 28.83 m | 16 in |
| 12 ft | 10 | 88 in | 32.63 m | 16 in |
Cut list for a 10 ft wall
| Piece | Quantity | Length |
|---|---|---|
| Vertical batten | 9 | 88 in |
| Top rail | 1 | 10 ft run |
| Mid rail | 1 | 10 ft run |
Pre-cut kits for this wall
Pre-cut kits that fit this project. Open a kit for photos, options and pricing.
01 / KITSquare Grid Board and Batten Accent Wall Kit | Pre-Cut MDF Easy Installation
From $252.41
View kit
02 / KITBoard and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation
From $31.42
View kit
03 / KITShaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation
From $69.80
View kit
04 / KITPeel and Stick Board and Batten Picture Frame Molding Set | Easy Installation
From $115.30
View kit
05 / KITBoard and Batten Wall Kit, Shaker Grid 1 to 5 Sets | Self-Adhesive Wainscoting
From $69.80
View kit
06 / KITQuick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm
From $592.00
View kitQuestions
How many battens for a 10 ft wall?
9 battens at 16 in spacing, plus a top rail across the 10 ft run.
Is Emerald Green warm or cool?
Emerald Green has a blue (cool) undertone and reads as a dark blue. Its calculated LRV is 12.6, so it absorbs light, so tone-on-tone molding reads as deep relief.
Should trim be the same color as Emerald Green walls?
Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds clear contrast (5.36:1), and black trim gives 2.77:1.
How high should the chair rail be in a office?
About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. A molding wall behind the desk doubles as a video-call backdrop.
Trace the details
Sources & dates
Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.
- Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
- DecoMoldings product catalogRecorded November 11, 2026