DecoMoldings

inspiration · Double Frame

Entryway Double Frame Wall Molding

Entryway Double Frame Wall Molding: wall elevation, entryway layout for 6, 8, 10 ft walls, cut list, calculator and pre-cut kits.

Catalog snapshot View 2 sources ↓

Project calculator

Wall molding linear-foot estimate

Estimate for rectangular molding frames.

Estimated quantity68.42 linear feet

Divide by 7.87 ft (240 cm stick) and round up for the number of sticks.

Formula & assumptionsframe_count * 2 * (frame_width_inches + frame_height_inches) / 12 * (1 + waste_percent / 100)

Assumes identical rectangular frames. The waste allowance is editable. The estimate does not optimize cuts or include separate rails, baseboards, or other trim.

Overview

Two parallel outlines 1.5 in apart, so each frame reads as one wide molding. It looks heavier than a single frame without a bigger profile. A bolder outline when a single 2.5 cm frame looks too light.

Double Frame layout on a 8 ft entryway wall

Molding over the full wall height, upper and lower rows divided by a chair rail. On a 8 ft wall with an 8 ft ceiling this gives 3 frames per row, each 26.7 in wide, with 50 in upper and 21 in lower frames. The layout uses about 42.36 m of 2.5 cm molding, or 18 sticks of 240 cm, including 10% waste. Short walls look best with fewer, taller frames.

Building the double frame pattern

The inner outline sits 1.5 in inside the outer one. Cut a 1.5 in spacer from an offcut and use it at every corner so the two lines stay parallel.

Wall elevation

White wall, tone-on-tone trim, double frame layout on a 8 ft wall. Colors are screen approximations.

Entryway wall sizes: double frame accent wall layout

Wall widthFrames per rowFrame widthFrame height (upper / lower)Molding incl. 10% waste240 cm sticksChair rail pieces (300 cm)
6 ft230 in50 / 21 in29.95 m131
8 ft326.7 in50 / 21 in42.36 m181
10 ft425 in50 / 21 in54.76 m232

Cut list for a 8 ft wall

Planning cut list
PieceQuantityLength
Frame top and bottom (lower row)626.7 in
Frame sides (lower row)621 in
Frame sides (upper row)650 in
Frame top and bottom (upper row)626.7 in
Inner outline pieces2423.7 in / 18 in
Chair rail1300 cm lengths

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Precut Double Frame Trim Wall Molding Kit, 1 to 5 Panels | Self-Adhesive Easy Installation01 / KIT

Precut Double Frame Trim Wall Molding Kit, 1 to 5 Panels | Self-Adhesive Easy Installation

From $60.00

View kit
Waterproof Double Picture Frame Molding Set, 1 to 4 Panels | Wall Trim Kit Easy Installation02 / KIT

Waterproof Double Picture Frame Molding Set, 1 to 4 Panels | Wall Trim Kit Easy Installation

From $69.80

View kit
Double Arched Wall Molding Set | Pre-Cut MDF Decorative Wall Panels03 / KIT

Double Arched Wall Molding Set | Pre-Cut MDF Decorative Wall Panels

From $133.60

View kit
Picture Frame Molding Set, Double Frame 1 to 4 Panels | Waterproof Wall Trim Kit04 / KIT

Picture Frame Molding Set, Double Frame 1 to 4 Panels | Waterproof Wall Trim Kit

From $69.80

View kit

Questions

How much molding do I need for a 8 ft entryway wall with double frame frames?

About 42.36 m (139 linear ft) including a chair rail and 10% waste, which is 18 sticks of 240 cm. That assumes 3 frames per row, 26.7 in wide, on an 8 ft ceiling.

How high should the chair rail be in a entryway?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Short walls look best with fewer, taller frames.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026