DecoMoldings

inspiration · Herringbone

Farmhouse Herringbone Wall Molding

Farmhouse Herringbone Wall Molding: wall elevation, living room layout for 12, 15, 18 ft walls, cut list, calculator and pre-cut kits.

Catalog snapshot View 2 sources ↓

Project calculator

Wall molding linear-foot estimate

Estimate for rectangular molding frames.

Estimated quantity133.76 linear feet

Divide by 7.87 ft (240 cm stick) and round up for the number of sticks.

Formula & assumptionsframe_count * 2 * (frame_width_inches + frame_height_inches) / 12 * (1 + waste_percent / 100)

Assumes identical rectangular frames. The waste allowance is editable. The estimate does not optimize cuts or include separate rails, baseboards, or other trim.

Overview

Chevron lines stacked up each panel create a herringbone rhythm across the wall. Farmhouse rooms (farmhouse and rustic) typically use board and batten, picture frame layouts: Board and batten or simple frames in warm whites, sage and muted greens.

Herringbone layout on a 15 ft living room wall

Molding over the full wall height, upper and lower rows divided by a chair rail. On a 15 ft wall with an 8 ft ceiling this gives 6 frames per row, each 25.3 in wide, with 50 in upper and 21 in lower frames. The layout uses about 76.93 m of 2.5 cm molding, or 33 sticks of 240 cm, including 10% waste. Center the layout on the sofa or TV rather than the wall when furniture is off-center.

Building the herringbone pattern

Chevrons are pairs of short pieces meeting at a point down the center of each panel. Keep the angle and the vertical spacing identical so the rows line up across frames.

Farmhouse look

Board and batten or simple frames in warm whites, sage and muted greens. Recommended layouts: board and batten, picture frame.

Wall elevation

White wall, tone-on-tone trim, herringbone layout on a 15 ft wall. Colors are screen approximations.

Living Room wall sizes: herringbone accent wall layout

Wall widthFrames per rowFrame widthFrame height (upper / lower)Molding incl. 10% waste240 cm sticksChair rail pieces (300 cm)
12 ft524 in50 / 21 in61.83 m262
15 ft625.3 in50 / 21 in76.93 m332
18 ft726.3 in50 / 21 in92.02 m392

Cut list for a 15 ft wall

Planning cut list
PieceQuantityLength
Frame top and bottom (lower row)1225.3 in
Frame sides (lower row)1221 in
Frame sides (upper row)1250 in
Frame top and bottom (upper row)1225.3 in
Chair rail2300 cm lengths

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Living Room Herringbone Pattern Wall Molding Kit, Ready to Assemble for Living Areas | Pre-Cut & Primed01 / KIT

Living Room Herringbone Pattern Wall Molding Kit, Ready to Assemble for Living Areas | Pre-Cut & Primed

From $235.00

View kit
Geometric Chevron Accent Wall Molding Kit, Pre-Cut | Easy Installation02 / KIT

Geometric Chevron Accent Wall Molding Kit, Pre-Cut | Easy Installation

From $232.74

View kit

Questions

How much molding do I need for a 15 ft living room wall with herringbone frames?

About 76.93 m (252 linear ft) including a chair rail and 10% waste, which is 33 sticks of 240 cm. That assumes 6 frames per row, 25.3 in wide, on an 8 ft ceiling.

How high should the chair rail be in a living room?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Center the layout on the sofa or TV rather than the wall when furniture is off-center.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026