inspiration · Board and Batten
Light Blue Kitchen Board and Batten Wall Molding
Light Blue Kitchen Board and Batten Wall Molding: wall elevation, color data (LRV 61), kitchen layout for 6, 8, 10 ft walls, cut list, calculator and pre-cut
Project calculator
Overview
Light Blue is a light blue with a blue (cool) undertone and a calculated LRV of 61. Against white trim the contrast ratio is 1.43:1, which gives almost no contrast, so the molding reads through shadow alone (a tone-on-tone look); painted tone-on-tone, the board and batten pattern shows only through its shadow lines.
Board and Batten layout on a 8 ft kitchen wall
With battens every 16 in, a 8 ft wall takes 7 battens of 88 in plus a top rail: about 22.58 m of board including 10% waste. Keep molding off the backsplash area and use a scrubbable paint finish.
Building the board and batten pattern
Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.
Painting molding in Light Blue
Blues work best fully drenched: wall, molding and chair rail in one color, with a slightly higher sheen on the trim.
Wall elevation
Color data
| Color | Brand | Code | Hex | Calculated LRV | Undertone | Depth | Contrast vs white trim | Contrast vs black trim |
|---|---|---|---|---|---|---|---|---|
| Light Blue | Generic | #BCD0DC | 61 | blue (cool) | light | 1.43:1 | 10.36:1 |
Trim color pairings
| Pairing | Trim color | Hex | Contrast | Effect |
|---|---|---|---|---|
| tone-on-tone | Light Blue | #BCD0DC | 1:1 | Trim painted the same color as the wall |
| matching white | BM Chantilly Lace | #F4F6F1 | 1.46:1 | White with the closest undertone |
| contrast | Black | #1F1F1F | 10.36:1 | Dark trim for a graphic outline |
Kitchen wall sizes: board and batten accent wall layout
| Wall width | Battens | Batten height | Board incl. waste | Spacing |
|---|---|---|---|---|
| 6 ft | 6 | 88 in | 18.78 m | 16 in |
| 8 ft | 7 | 88 in | 22.58 m | 16 in |
| 10 ft | 9 | 88 in | 28.83 m | 16 in |
Cut list for a 8 ft wall
| Piece | Quantity | Length |
|---|---|---|
| Vertical batten | 7 | 88 in |
| Top rail | 1 | 8 ft run |
| Mid rail | 1 | 8 ft run |
Pre-cut kits for this wall
Pre-cut kits that fit this project. Open a kit for photos, options and pricing.
01 / KITShaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation
From $69.80
View kit
02 / KITBoard and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation
From $31.42
View kit
03 / KITSquare Grid Board and Batten Accent Wall Kit | Pre-Cut MDF Easy Installation
From $252.41
View kit
04 / KITQuick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm
From $592.00
View kit
05 / KITShaker Square Grid Wall Paneling Kit | Pre-Cut MDF Decorative Wall Panels
From $270.00
View kit
06 / KITPaintable Pre-Cut Wall Design: Ready to Assemble Board & Batten MDF | Effortless Installation W:75mm x T:8mm
From $840.00
View kitQuestions
How many battens for a 8 ft wall?
7 battens at 16 in spacing, plus a top rail across the 8 ft run.
Is Light Blue warm or cool?
Light Blue has a blue (cool) undertone and reads as a light blue. Its calculated LRV is 61, so it reflects a lot of light and keeps molding shadows soft.
Should trim be the same color as Light Blue walls?
Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds almost no contrast, so the molding reads through shadow alone (a tone-on-tone look) (1.43:1), and black trim gives 10.36:1.
How high should the chair rail be in a kitchen?
About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Keep molding off the backsplash area and use a scrubbable paint finish.
Trace the details
Sources & dates
Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.
- Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
- DecoMoldings product catalogRecorded November 11, 2026