DecoMoldings

inspiration · Board and Batten

Off-White Dining Room Board and Batten Wall Molding

Off-White Dining Room Board and Batten Wall Molding: wall elevation, color data (LRV 80.9), dining room layout for 10, 12, 14 ft walls, cut list, calculator a

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity9 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

Off-White is a white warm white with a warm (yellow) undertone and a calculated LRV of 80.9. Against white trim the contrast ratio is 1.1:1, which gives almost no contrast, so the molding reads through shadow alone (a tone-on-tone look); painted tone-on-tone, the board and batten pattern shows only through its shadow lines.

Board and Batten layout on a 12 ft dining room wall

With battens every 16 in, a 12 ft wall takes 10 battens of 88 in plus a top rail: about 32.63 m of board including 10% waste. Check that the chair rail clears chair backs, usually 32 to 36 in.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Painting molding in Off-White

Warm whites keep molding soft and traditional. Match the trim to the wall for a calm look, or use a cleaner white on trim to sharpen the outlines.

Wall elevation

Off-White wall, tone-on-tone trim, board and batten layout on a 12 ft wall. Colors are screen approximations.

Color data

ColorBrandCodeHexCalculated LRVUndertoneDepthContrast vs white trimContrast vs black trim
Off-WhiteGeneric#EDE8DC80.9warm (yellow)white1.1:113.48:1

Trim color pairings

PairingTrim colorHexContrastEffect
tone-on-toneOff-White#EDE8DC1:1Trim painted the same color as the wall
matching whiteF&B Wimborne White#F7F3E81.1:1White with the closest undertone
contrastBlack#1F1F1F13.48:1Dark trim for a graphic outline

Dining Room wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
10 ft988 in28.83 m16 in
12 ft1088 in32.63 m16 in
14 ft1288 in38.89 m16 in

Cut list for a 12 ft wall

Planning cut list
PieceQuantityLength
Vertical batten1088 in
Top rail112 ft run
Mid rail112 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Shaker MDF Paneling, Long-Lasting Pre-Cut for Easy Installation | Unprimed Wall Molding W:75mm x T:8mm01 / KIT

Shaker MDF Paneling, Long-Lasting Pre-Cut for Easy Installation | Unprimed Wall Molding W:75mm x T:8mm

From $307.00

View kit
Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation02 / KIT

Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation

From $69.80

View kit
Accent Board and Batten Design Wall Covering Kit, Factory Primed | Pre-Cut & Ready to Assemble03 / KIT

Accent Board and Batten Design Wall Covering Kit, Factory Primed | Pre-Cut & Ready to Assemble

From $607.00

View kit
Board and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation04 / KIT

Board and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation

From $31.42

View kit
MDF Wall Panels, Shaker Paneling Kit 75 mm Boards | Pre-Cut Unprimed05 / KIT

MDF Wall Panels, Shaker Paneling Kit 75 mm Boards | Pre-Cut Unprimed

From $307.00

View kit
Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm06 / KIT

Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm

From $592.00

View kit

Questions

How many battens for a 12 ft wall?

10 battens at 16 in spacing, plus a top rail across the 12 ft run.

Is Off-White warm or cool?

Off-White has a warm (yellow) undertone and reads as a white warm white. Its calculated LRV is 80.9, so it reflects a lot of light and keeps molding shadows soft.

Should trim be the same color as Off-White walls?

Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds almost no contrast, so the molding reads through shadow alone (a tone-on-tone look) (1.1:1), and black trim gives 13.48:1.

How high should the chair rail be in a dining room?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Check that the chair rail clears chair backs, usually 32 to 36 in.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026