inspiration · Board and Batten

Off-White Kitchen Board and Batten Wall Molding

Off-White Kitchen Board and Batten Wall Molding: wall elevation, color data (LRV 80.9), kitchen layout for 6, 8, 10 ft walls, cut list, calculator and pre-cut

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity6 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

Off-White is a white warm white with a warm (yellow) undertone and a calculated LRV of 80.9. Against white trim the contrast ratio is 1.1:1, which gives almost no contrast, so the molding reads through shadow alone (a tone-on-tone look); painted tone-on-tone, the board and batten pattern shows only through its shadow lines.

Board and Batten layout on a 8 ft kitchen wall

With battens every 16 in, a 8 ft wall takes 7 battens of 88 in plus a top rail: about 22.58 m of board including 10% waste. Keep molding off the backsplash area and use a scrubbable paint finish.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Painting molding in Off-White

Warm whites keep molding soft and traditional. Match the trim to the wall for a calm look, or use a cleaner white on trim to sharpen the outlines.

Wall elevation

Off-White wall, tone-on-tone trim, board and batten layout on a 8 ft wall. Colors are screen approximations.

Color data

ColorBrandCodeHexCalculated LRVUndertoneDepthContrast vs white trimContrast vs black trim
Off-WhiteGeneric#EDE8DC80.9warm (yellow)white1.1:113.48:1

Trim color pairings

PairingTrim colorHexContrastEffect
tone-on-toneOff-White#EDE8DC1:1Trim painted the same color as the wall
matching whiteF&B Wimborne White#F7F3E81.1:1White with the closest undertone
contrastBlack#1F1F1F13.48:1Dark trim for a graphic outline

Kitchen wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
6 ft688 in18.78 m16 in
8 ft788 in22.58 m16 in
10 ft988 in28.83 m16 in

Cut list for a 8 ft wall

Planning cut list
PieceQuantityLength
Vertical batten788 in
Top rail18 ft run
Mid rail18 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Pre-Cut Board and Batten Wall Trim Panels, Easy DIY Wall Moulding | Quick Installation W:75mm x T:8mm01 / KIT

Pre-Cut Board and Batten Wall Trim Panels, Easy DIY Wall Moulding | Quick Installation W:75mm x T:8mm

From $733.00

View kit
Shaker Wall Paneling Kit, 75 mm Boards | Pre-Cut MDF Easy Installation02 / KIT

Shaker Wall Paneling Kit, 75 mm Boards | Pre-Cut MDF Easy Installation

From $250.00

View kit
Decorative Wall Panels, Shaker Square Grid Kit | Pre-Cut Paintable MDF03 / KIT

Decorative Wall Panels, Shaker Square Grid Kit | Pre-Cut Paintable MDF

From $270.00

View kit
DIY Hassle-Free Board & Batten Wall Makeovers | Pre-Cut MDF Panels for Easy Installation W:75mm x T:8mm04 / KIT

DIY Hassle-Free Board & Batten Wall Makeovers | Pre-Cut MDF Panels for Easy Installation W:75mm x T:8mm

From $515.00

View kit
Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm05 / KIT

Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm

From $592.00

View kit
Accent Board and Batten Design Wall Covering Kit, Factory Primed | Pre-Cut & Ready to Assemble06 / KIT

Accent Board and Batten Design Wall Covering Kit, Factory Primed | Pre-Cut & Ready to Assemble

From $607.00

View kit

Questions

How many battens for a 8 ft wall?

7 battens at 16 in spacing, plus a top rail across the 8 ft run.

Is Off-White warm or cool?

Off-White has a warm (yellow) undertone and reads as a white warm white. Its calculated LRV is 80.9, so it reflects a lot of light and keeps molding shadows soft.

Should trim be the same color as Off-White walls?

Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds almost no contrast, so the molding reads through shadow alone (a tone-on-tone look) (1.1:1), and black trim gives 13.48:1.

How high should the chair rail be in a kitchen?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Keep molding off the backsplash area and use a scrubbable paint finish.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026