inspiration · Double Frame
Peel and Stick Double Frame Wall Molding for the Office
Peel and Stick Double Frame Wall Molding for the Office: wall elevation, office layout for 9, 10, 12 ft walls, cut list, calculator and pre-cut kits.
Project calculator
Overview
Two parallel outlines 1.5 in apart, so each frame reads as one wide molding. It looks heavier than a single frame without a bigger profile. A bolder outline when a single 2.5 cm frame looks too light.
Double Frame layout on a 10 ft office wall
Molding over the full wall height, upper and lower rows divided by a chair rail. On a 10 ft wall with an 8 ft ceiling this gives 4 frames per row, each 25 in wide, with 50 in upper and 21 in lower frames. The layout uses about 54.76 m of 2.5 cm molding, or 23 sticks of 240 cm, including 10% waste. A molding wall behind the desk doubles as a video-call backdrop.
Building the double frame pattern
The inner outline sits 1.5 in inside the outer one. Cut a 1.5 in spacer from an offcut and use it at every corner so the two lines stay parallel.
Wall elevation
Office wall sizes: double frame accent wall layout
| Wall width | Frames per row | Frame width | Frame height (upper / lower) | Molding incl. 10% waste | 240 cm sticks | Chair rail pieces (300 cm) |
|---|---|---|---|---|---|---|
| 9 ft | 3 | 30.7 in | 50 / 21 in | 45.37 m | 19 | 1 |
| 10 ft | 4 | 25 in | 50 / 21 in | 54.76 m | 23 | 2 |
| 12 ft | 5 | 24 in | 50 / 21 in | 67.17 m | 28 | 2 |
Cut list for a 10 ft wall
| Piece | Quantity | Length |
|---|---|---|
| Frame top and bottom (lower row) | 8 | 25 in |
| Frame sides (lower row) | 8 | 21 in |
| Frame sides (upper row) | 8 | 50 in |
| Frame top and bottom (upper row) | 8 | 25 in |
| Inner outline pieces | 32 | 22 in / 18 in |
| Chair rail | 2 | 300 cm lengths |
Steps: for renters
order: 1; text: Choose a self-adhesive kit and skip caulk so the pieces can come off later.; items: Self-adhesive kit · Degreaser · Painter's tape
order: 2; text: Clean the wall with a degreaser so the adhesive grips.; items: Self-adhesive kit · Degreaser · Painter's tape
order: 3; text: Paint the molding before installing so you do not paint the wall.; items: Self-adhesive kit · Degreaser · Painter's tape
order: 4; text: Press each piece for several seconds; remove slowly with gentle heat when you move.; items: Self-adhesive kit · Degreaser · Painter's tape
Pre-cut kits for this wall
Pre-cut kits that fit this project. Open a kit for photos, options and pricing.
01 / KITPrecut Double Frame Trim Wall Molding Kit, 1 to 5 Panels | Self-Adhesive Easy Installation
From $60.00
View kitQuestions
How much molding do I need for a 10 ft office wall with double frame frames?
About 54.76 m (180 linear ft) including a chair rail and 10% waste, which is 23 sticks of 240 cm. That assumes 4 frames per row, 25 in wide, on an 8 ft ceiling.
How high should the chair rail be in a office?
About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. A molding wall behind the desk doubles as a video-call backdrop.
Trace the details
Sources & dates
Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.
- Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
- DecoMoldings product catalogRecorded November 11, 2026