inspiration · Board and Batten

SW Alabaster Office Board and Batten Wall Molding

SW Alabaster Office Board and Batten Wall Molding: wall elevation, color data (LRV 82.2), office layout for 9, 10, 12 ft walls, cut list, calculator and pre-c

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity8 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

SW Alabaster is a white with a warm (yellow) undertone and a calculated LRV of 82.2. Against white trim the contrast ratio is 1.08:1, which gives almost no contrast, so the molding reads through shadow alone (a tone-on-tone look); painted tone-on-tone, the board and batten pattern shows only through its shadow lines.

Board and Batten layout on a 10 ft office wall

With battens every 16 in, a 10 ft wall takes 9 battens of 88 in plus a top rail: about 28.83 m of board including 10% waste. A molding wall behind the desk doubles as a video-call backdrop.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Painting molding in SW Alabaster

Whites show molding through shadow only, so side light (a window or wall sconce) brings the pattern out. Use satin on trim and eggshell on the wall to add a slight sheen difference.

Wall elevation

SW Alabaster wall, tone-on-tone trim, board and batten layout on a 10 ft wall. Colors are screen approximations.

Color data

ColorBrandCodeHexCalculated LRVUndertoneDepthContrast vs white trimContrast vs black trim
SW AlabasterSherwin-Williams#EDEAE082.2warm (yellow)white1.08:113.69:1

Trim color pairings

PairingTrim colorHexContrastEffect
tone-on-toneSW Alabaster#EDEAE01:1Trim painted the same color as the wall
matching whiteSW Greek Villa#F0ECE21.02:1White with the closest undertone
contrastBlack#1F1F1F13.69:1Dark trim for a graphic outline

Office wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
9 ft888 in25.7 m16 in
10 ft988 in28.83 m16 in
12 ft1088 in32.63 m16 in

Cut list for a 10 ft wall

Planning cut list
PieceQuantityLength
Vertical batten988 in
Top rail110 ft run
Mid rail110 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Shaker Wall Paneling Kit, 75 mm Boards | Pre-Cut MDF Easy Installation01 / KIT

Shaker Wall Paneling Kit, 75 mm Boards | Pre-Cut MDF Easy Installation

From $250.00

View kit
Decorative Wall Panels, Shaker Square Grid Kit | Pre-Cut Paintable MDF02 / KIT

Decorative Wall Panels, Shaker Square Grid Kit | Pre-Cut Paintable MDF

From $270.00

View kit
Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm03 / KIT

Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm

From $592.00

View kit
Decorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble04 / KIT

Decorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble

From $775.00

View kit
Pre-Cut Board and Batten Wall Trim Panels, Easy DIY Wall Moulding | Quick Installation W:75mm x T:8mm05 / KIT

Pre-Cut Board and Batten Wall Trim Panels, Easy DIY Wall Moulding | Quick Installation W:75mm x T:8mm

From $733.00

View kit
Paintable Pre-Cut Wall Design: Ready to Assemble Board & Batten MDF | Effortless Installation W:75mm x T:8mm06 / KIT

Paintable Pre-Cut Wall Design: Ready to Assemble Board & Batten MDF | Effortless Installation W:75mm x T:8mm

From $840.00

View kit

Questions

How many battens for a 10 ft wall?

9 battens at 16 in spacing, plus a top rail across the 10 ft run.

Is SW Alabaster warm or cool?

SW Alabaster has a warm (yellow) undertone and reads as a white white. Its calculated LRV is 82.2, so it reflects a lot of light and keeps molding shadows soft.

Should trim be the same color as SW Alabaster walls?

Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds almost no contrast, so the molding reads through shadow alone (a tone-on-tone look) (1.08:1), and black trim gives 13.69:1.

How high should the chair rail be in a office?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. A molding wall behind the desk doubles as a video-call backdrop.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026