inspiration · Board and Batten
SW Iron Ore Hallway Board and Batten Wall Molding
SW Iron Ore Hallway Board and Batten Wall Molding: wall elevation, color data (LRV 5.6), hallway layout for 6, 10, 14 ft walls, cut list, calculator and pre-c
Project calculator
Overview
SW Iron Ore is a dark gray with a neutral undertone and a calculated LRV of 5.6. Against white trim the contrast ratio is 8.92:1, which gives strong, graphic contrast; painted tone-on-tone, the board and batten pattern shows only through its shadow lines.
Board and Batten layout on a 10 ft hallway wall
With battens every 16 in, a 10 ft wall takes 9 battens of 88 in plus a top rail: about 28.83 m of board including 10% waste. Long, narrow walls suit a repeating rhythm of equal frames.
Building the board and batten pattern
Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.
Painting molding in SW Iron Ore
Grays sit in the middle of the contrast range: white trim reads clearly, while same-color trim gives a quiet, architectural look.
Wall elevation
Color data
| Color | Brand | Code | Hex | Calculated LRV | Undertone | Depth | Contrast vs white trim | Contrast vs black trim |
|---|---|---|---|---|---|---|---|---|
| SW Iron Ore | Sherwin-Williams | #434341 | 5.6 | neutral | dark | 8.92:1 | 1.66:1 |
Trim color pairings
| Pairing | Trim color | Hex | Contrast | Effect |
|---|---|---|---|---|
| tone-on-tone | SW Iron Ore | #434341 | 1:1 | Trim painted the same color as the wall |
| matching white | F&B All White | #FBF8F4 | 9.37:1 | White with the closest undertone |
| contrast | White | #F4F3EE | 8.92:1 | Light trim for crisp contrast |
Hallway wall sizes: board and batten accent wall layout
| Wall width | Battens | Batten height | Board incl. waste | Spacing |
|---|---|---|---|---|
| 6 ft | 6 | 88 in | 18.78 m | 16 in |
| 10 ft | 9 | 88 in | 28.83 m | 16 in |
| 14 ft | 12 | 88 in | 38.89 m | 16 in |
Cut list for a 10 ft wall
| Piece | Quantity | Length |
|---|---|---|
| Vertical batten | 9 | 88 in |
| Top rail | 1 | 10 ft run |
| Mid rail | 1 | 10 ft run |
Pre-cut kits for this wall
Pre-cut kits that fit this project. Open a kit for photos, options and pricing.
01 / KITQuick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm
From $592.00
View kit
02 / KITPaintable Pre-Cut Wall Design: Ready to Assemble Board & Batten MDF | Effortless Installation W:75mm x T:8mm
From $840.00
View kit
03 / KITDecorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble
From $775.00
View kit
04 / KITShaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation
From $69.80
View kit
05 / KITShaker MDF Paneling, Long-Lasting Pre-Cut for Easy Installation | Unprimed Wall Molding W:75mm x T:8mm
From $307.00
View kit
06 / KITMDF Wall Panels, Shaker Paneling Kit 75 mm Boards | Pre-Cut Unprimed
From $307.00
View kitQuestions
How many battens for a 10 ft wall?
9 battens at 16 in spacing, plus a top rail across the 10 ft run.
Is SW Iron Ore warm or cool?
SW Iron Ore has a neutral undertone and reads as a dark gray. Its calculated LRV is 5.6, so it absorbs light, so tone-on-tone molding reads as deep relief.
Should trim be the same color as SW Iron Ore walls?
Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds strong, graphic contrast (8.92:1), and black trim gives 1.66:1.
How high should the chair rail be in a hallway?
About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Long, narrow walls suit a repeating rhythm of equal frames.
Trace the details
Sources & dates
Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.
- Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
- DecoMoldings product catalogRecorded November 11, 2026