inspiration · Board and Batten
White Bathroom Board and Batten Wall Molding
White Bathroom Board and Batten Wall Molding: wall elevation, color data (LRV 89.5), bathroom layout for 5, 7, 9 ft walls, cut list, calculator and pre-cut ki
Project calculator
Overview
White is a white with a neutral undertone and a calculated LRV of 89.5. Against white trim the contrast ratio is 1:1, which gives almost no contrast, so the molding reads through shadow alone (a tone-on-tone look); painted tone-on-tone, the board and batten pattern shows only through its shadow lines.
Board and Batten layout on a 7 ft bathroom wall
With battens every 16 in, a 7 ft wall takes 7 battens of 88 in plus a top rail: about 21.9 m of board including 10% waste. Use moisture-resistant polystyrene outside the shower spray zone and a bathroom-rated paint.
Building the board and batten pattern
Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.
Painting molding in White
Whites show molding through shadow only, so side light (a window or wall sconce) brings the pattern out. Use satin on trim and eggshell on the wall to add a slight sheen difference.
Wall elevation
Color data
| Color | Brand | Code | Hex | Calculated LRV | Undertone | Depth | Contrast vs white trim | Contrast vs black trim |
|---|---|---|---|---|---|---|---|---|
| White | Generic | #F4F3EE | 89.5 | neutral | white | 1:1 | 14.84:1 |
Trim color pairings
| Pairing | Trim color | Hex | Contrast | Effect |
|---|---|---|---|---|
| tone-on-tone | White | #F4F3EE | 1:1 | Trim painted the same color as the wall |
| matching white | SW Pure White | #EDECE6 | 1.07:1 | White with the closest undertone |
| contrast | Black | #1F1F1F | 14.84:1 | Dark trim for a graphic outline |
Bathroom wall sizes: board and batten accent wall layout
| Wall width | Battens | Batten height | Board incl. waste | Spacing |
|---|---|---|---|---|
| 5 ft | 5 | 88 in | 15.65 m | 16 in |
| 7 ft | 7 | 88 in | 21.9 m | 16 in |
| 9 ft | 8 | 88 in | 25.7 m | 16 in |
Cut list for a 7 ft wall
| Piece | Quantity | Length |
|---|---|---|
| Vertical batten | 7 | 88 in |
| Top rail | 1 | 7 ft run |
| Mid rail | 1 | 7 ft run |
Pre-cut kits for this wall
Pre-cut kits that fit this project. Open a kit for photos, options and pricing.
01 / KITDIY Hassle-Free Board & Batten Wall Makeovers | Pre-Cut MDF Panels for Easy Installation W:75mm x T:8mm
From $515.00
View kit
02 / KITShaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets | Self-Adhesive Easy Installation
From $69.80
View kit
03 / KITDecorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble
From $775.00
View kit
04 / KITSquare Grid Board and Batten Accent Wall Kit | Pre-Cut MDF Easy Installation
From $252.41
View kit
05 / KITShaker Wall Paneling Kit, 75 mm Boards | Pre-Cut MDF Easy Installation
From $250.00
View kit
06 / KITMDF Wall Panels, Shaker Paneling Kit 75 mm Boards | Pre-Cut Unprimed
From $307.00
View kitQuestions
How many battens for a 7 ft wall?
7 battens at 16 in spacing, plus a top rail across the 7 ft run.
Is White warm or cool?
White has a neutral undertone and reads as a white white. Its calculated LRV is 89.5, so it reflects a lot of light and keeps molding shadows soft.
Should trim be the same color as White walls?
Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds almost no contrast, so the molding reads through shadow alone (a tone-on-tone look) (1:1), and black trim gives 14.84:1.
How high should the chair rail be in a bathroom?
About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Use moisture-resistant polystyrene outside the shower spray zone and a bathroom-rated paint.
Trace the details
Sources & dates
Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.
- Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
- DecoMoldings product catalogRecorded November 11, 2026