inspiration · Board and Batten

White Entryway Board and Batten Wall Molding

White Entryway Board and Batten Wall Molding: wall elevation, color data (LRV 89.5), entryway layout for 6, 8, 10 ft walls, cut list, calculator and pre-cut k

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity6 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

White is a white with a neutral undertone and a calculated LRV of 89.5. Against white trim the contrast ratio is 1:1, which gives almost no contrast, so the molding reads through shadow alone (a tone-on-tone look); painted tone-on-tone, the board and batten pattern shows only through its shadow lines.

Board and Batten layout on a 8 ft entryway wall

With battens every 16 in, a 8 ft wall takes 7 battens of 88 in plus a top rail: about 22.58 m of board including 10% waste. Short walls look best with fewer, taller frames.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Painting molding in White

Whites show molding through shadow only, so side light (a window or wall sconce) brings the pattern out. Use satin on trim and eggshell on the wall to add a slight sheen difference.

Wall elevation

White wall, tone-on-tone trim, board and batten layout on a 8 ft wall. Colors are screen approximations.

Color data

ColorBrandCodeHexCalculated LRVUndertoneDepthContrast vs white trimContrast vs black trim
WhiteGeneric#F4F3EE89.5neutralwhite1:114.84:1

Trim color pairings

PairingTrim colorHexContrastEffect
tone-on-toneWhite#F4F3EE1:1Trim painted the same color as the wall
matching whiteSW Pure White#EDECE61.07:1White with the closest undertone
contrastBlack#1F1F1F14.84:1Dark trim for a graphic outline

Entryway wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
6 ft688 in18.78 m16 in
8 ft788 in22.58 m16 in
10 ft988 in28.83 m16 in

Cut list for a 8 ft wall

Planning cut list
PieceQuantityLength
Vertical batten788 in
Top rail18 ft run
Mid rail18 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Board and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation01 / KIT

Board and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation

From $31.42

View kit
Decorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble02 / KIT

Decorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble

From $775.00

View kit
Peel and Stick Board and Batten Picture Frame Molding Set | Easy Installation03 / KIT

Peel and Stick Board and Batten Picture Frame Molding Set | Easy Installation

From $115.30

View kit
Board and Batten Wall Kit, Shaker Grid 1 to 5 Sets | Self-Adhesive Wainscoting04 / KIT

Board and Batten Wall Kit, Shaker Grid 1 to 5 Sets | Self-Adhesive Wainscoting

From $69.80

View kit
Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm05 / KIT

Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm

From $592.00

View kit
Shaker MDF Paneling, Long-Lasting Pre-Cut for Easy Installation | Unprimed Wall Molding W:75mm x T:8mm06 / KIT

Shaker MDF Paneling, Long-Lasting Pre-Cut for Easy Installation | Unprimed Wall Molding W:75mm x T:8mm

From $307.00

View kit

Questions

How many battens for a 8 ft wall?

7 battens at 16 in spacing, plus a top rail across the 8 ft run.

Is White warm or cool?

White has a neutral undertone and reads as a white white. Its calculated LRV is 89.5, so it reflects a lot of light and keeps molding shadows soft.

Should trim be the same color as White walls?

Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds almost no contrast, so the molding reads through shadow alone (a tone-on-tone look) (1:1), and black trim gives 14.84:1.

How high should the chair rail be in a entryway?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Short walls look best with fewer, taller frames.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026