BM White Dove Bathroom Board and Batten Wall Molding

BM White Dove (OC-17) is a white with a green undertone and a calculated LRV of 85.2 (published LRV 83). Against white trim the contrast ratio is 1.05:1, which gives almost no contrast, so the molding reads through shadow alone (a tone-on-tone look); painted tone-on-tone, the board and batten pattern shows only through its shadow lines.

Board and Batten layout on a 7 ft bathroom wall

With battens every 16 in, a 7 ft wall takes 7 battens of 88 in plus a top rail: about 21.9 m of board including 10% waste. Use moisture-resistant polystyrene outside the shower spray zone and a bathroom-rated paint.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Painting molding in BM White Dove

Whites show molding through shadow only, so side light (a window or wall sconce) brings the pattern out. Use satin on trim and eggshell on the wall to add a slight sheen difference.