DecoMoldings

inspiration · Board and Batten

Entryway Board and Batten Wall Molding

Entryway Board and Batten Wall Molding: wall elevation, entryway layout for 6, 8, 10 ft walls, cut list, calculator and pre-cut kits.

Catalog snapshot View 2 sources ↓

Project calculator

Batten count estimate

Estimate for vertical battens at even spacing.

Estimated quantity6 battens (add one for the end)

Round up and add one batten to close the run.

Formula & assumptionsceiling(wall_width_inches / panel_coverage_width_inches)

Assumes one horizontal run of equal-width panels using effective coverage width. It does not account for openings, panel height, pattern matching, or extra waste.

Overview

Vertical battens spaced 16 in apart under a horizontal top rail, built from flat MDF boards. Farmhouse, craftsman and mudroom walls.

Board and Batten layout on a 8 ft entryway wall

With battens every 16 in, a 8 ft wall takes 7 battens of 88 in plus a top rail: about 22.58 m of board including 10% waste. Short walls look best with fewer, taller frames.

Building the board and batten pattern

Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.

Wall elevation

White wall, tone-on-tone trim, board and batten layout on a 8 ft wall. Colors are screen approximations.

Entryway wall sizes: board and batten accent wall layout

Wall widthBattensBatten heightBoard incl. wasteSpacing
6 ft688 in18.78 m16 in
8 ft788 in22.58 m16 in
10 ft988 in28.83 m16 in

Cut list for a 8 ft wall

Planning cut list
PieceQuantityLength
Vertical batten788 in
Top rail18 ft run
Mid rail18 ft run

Pre-cut kits for this wall

Pre-cut kits that fit this project. Open a kit for photos, options and pricing.

Square Grid Board and Batten Accent Wall Kit | Pre-Cut MDF Easy Installation01 / KIT

Square Grid Board and Batten Accent Wall Kit | Pre-Cut MDF Easy Installation

From $252.41

View kit
Paintable Pre-Cut Wall Design: Ready to Assemble Board & Batten MDF | Effortless Installation W:75mm x T:8mm02 / KIT

Paintable Pre-Cut Wall Design: Ready to Assemble Board & Batten MDF | Effortless Installation W:75mm x T:8mm

From $840.00

View kit
Shaker Wall Paneling Kit, 75 mm Boards | Pre-Cut MDF Easy Installation03 / KIT

Shaker Wall Paneling Kit, 75 mm Boards | Pre-Cut MDF Easy Installation

From $250.00

View kit
Decorative Wall Panels, Shaker Square Grid Kit | Pre-Cut Paintable MDF04 / KIT

Decorative Wall Panels, Shaker Square Grid Kit | Pre-Cut Paintable MDF

From $270.00

View kit
Heritage DIY Board and Batten Panels, Pre-Cut MDF for Fast Installation | Unprimed W:75mm x T:8mm05 / KIT

Heritage DIY Board and Batten Panels, Pre-Cut MDF for Fast Installation | Unprimed W:75mm x T:8mm

From $581.00

View kit
Decorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble06 / KIT

Decorative Board and Batten Wall Accent Molding Kit | Pre-Cut & Ready to Assemble

From $775.00

View kit

Questions

How many battens for a 8 ft wall?

7 battens at 16 in spacing, plus a top rail across the 8 ft run.

How high should the chair rail be in a entryway?

About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Short walls look best with fewer, taller frames.

Trace the details

Sources & dates

Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.

  1. Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
  2. DecoMoldings product catalogRecorded November 11, 2026