inspiration · Board and Batten
SW Iron Ore Entryway Board and Batten Wall Molding
SW Iron Ore Entryway Board and Batten Wall Molding: wall elevation, color data (LRV 5.6), entryway layout for 6, 8, 10 ft walls, cut list, calculator and pre-
Project calculator
Overview
SW Iron Ore is a dark gray with a neutral undertone and a calculated LRV of 5.6. Against white trim the contrast ratio is 8.92:1, which gives strong, graphic contrast; painted tone-on-tone, the board and batten pattern shows only through its shadow lines.
Board and Batten layout on a 8 ft entryway wall
With battens every 16 in, a 8 ft wall takes 7 battens of 88 in plus a top rail: about 22.58 m of board including 10% waste. Short walls look best with fewer, taller frames.
Building the board and batten pattern
Fix the top rail level first, then hang the battens from it at 16 in spacing. Start from the center of the wall so the end gaps match.
Painting molding in SW Iron Ore
Grays sit in the middle of the contrast range: white trim reads clearly, while same-color trim gives a quiet, architectural look.
Wall elevation
Color data
| Color | Brand | Code | Hex | Calculated LRV | Undertone | Depth | Contrast vs white trim | Contrast vs black trim |
|---|---|---|---|---|---|---|---|---|
| SW Iron Ore | Sherwin-Williams | #434341 | 5.6 | neutral | dark | 8.92:1 | 1.66:1 |
Trim color pairings
| Pairing | Trim color | Hex | Contrast | Effect |
|---|---|---|---|---|
| tone-on-tone | SW Iron Ore | #434341 | 1:1 | Trim painted the same color as the wall |
| matching white | F&B All White | #FBF8F4 | 9.37:1 | White with the closest undertone |
| contrast | White | #F4F3EE | 8.92:1 | Light trim for crisp contrast |
Entryway wall sizes: board and batten accent wall layout
| Wall width | Battens | Batten height | Board incl. waste | Spacing |
|---|---|---|---|---|
| 6 ft | 6 | 88 in | 18.78 m | 16 in |
| 8 ft | 7 | 88 in | 22.58 m | 16 in |
| 10 ft | 9 | 88 in | 28.83 m | 16 in |
Cut list for a 8 ft wall
| Piece | Quantity | Length |
|---|---|---|
| Vertical batten | 7 | 88 in |
| Top rail | 1 | 8 ft run |
| Mid rail | 1 | 8 ft run |
Pre-cut kits for this wall
Pre-cut kits that fit this project. Open a kit for photos, options and pricing.
01 / KITBoard and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation
From $31.42
View kit
02 / KITPre-Cut Board and Batten Wall Trim Panels, Easy DIY Wall Moulding | Quick Installation W:75mm x T:8mm
From $733.00
View kit
03 / KITDIY Hassle-Free Board & Batten Wall Makeovers | Pre-Cut MDF Panels for Easy Installation W:75mm x T:8mm
From $515.00
View kit
04 / KITPaintable Pre-Cut Wall Design: Ready to Assemble Board & Batten MDF | Effortless Installation W:75mm x T:8mm
From $840.00
View kit
05 / KITPeel and Stick Board and Batten Picture Frame Molding Set | Easy Installation
From $115.30
View kit
06 / KITBoard and Batten Wall Kit, Shaker Grid 1 to 5 Sets | Self-Adhesive Wainscoting
From $69.80
View kitQuestions
How many battens for a 8 ft wall?
7 battens at 16 in spacing, plus a top rail across the 8 ft run.
Is SW Iron Ore warm or cool?
SW Iron Ore has a neutral undertone and reads as a dark gray. Its calculated LRV is 5.6, so it absorbs light, so tone-on-tone molding reads as deep relief.
Should trim be the same color as SW Iron Ore walls?
Painting the molding the same color gives a modern, tone-on-tone finish where only shadows show the pattern. White trim adds strong, graphic contrast (8.92:1), and black trim gives 1.66:1.
How high should the chair rail be in a entryway?
About one third of the ceiling height: 32 in on an 8 ft ceiling, 36 in on 9 ft and 40 in on 10 ft. Short walls look best with fewer, taller frames.
Trace the details
Sources & dates
Prices, options and photos come from our product catalog on the date shown. Layout tables are planning estimates; measure your wall before ordering.
- Paint color dataset (screen approximations; LRV calculated)Recorded November 11, 2026
- DecoMoldings product catalogRecorded November 11, 2026